Home Flat Glass Adhesives, Sealants & Primers

MIRROR MOUNTING TAPE 1.6mm x 24mm x 33m

VT5N

Please register or log in to place an order.

Mirror Mounting Tapes, Mirror Mounting Tapes, Mirror Mounting Tapes

The double sided mirror mounting tape is a closed-cell polyethylene foam, coated on both sides with a modified acrylic adhesive.

Features

  • Dimensions of tape - thickness x width x length of roll
  • New adhesion formulation
  • Higher adhesion level
  • Superior application in colder climates
  • Use in conjunction with Tuf As Nails (TAN) or Simson 70-03 (MS703G) mirror adhesives
  • Not recommended for mirrors installed on ceilings
  • Not recommended for vinyl-backed mirrors
  • Custom widths available on request

Installation Instructions

  • For installing mirrors on vertical walls Glasscorp recommends 24mm wide mirror tape and a tape and glue thickness of between 1.6 and 3mm. As a guide use 5 strips of double sided tape vertically per 1.0m²
  • Mirror tape should be applied in vertical lines as tape applied horizontally will gather moisture and not allow circulation of air. This may lead to corrosion of the mirror backing
  • Mirror adhesive (glue) contact area should be greater than 0.2m² per 1.0m²

Notes

  • Mirror tape is to be used in conjunction with a mirror mounting adhesive. Mirror tape should not be used to fix mirrors on its own
  • Customers should independently determine the suitability of this product for their specific purpose prior to use

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like