Home Safety Glass Carrying

GRABO PRO LIFTER - AUTO VACUUM SENSOR

N-171

Please register or log in to place an order.

Hand Suction Lifters, Hand Suction Lifters, Hand Suction Lifters, Hand Suction Lifters, Powered Vacuum Lifters, Hand Suction Lifters, New Products

GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 170kg. In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.

Features

  • The handle is also equipped with a digital display that shows the maximum weight that the GRABO Pro can safely lift at that very moment. The weight is displayed in both pounds and kgs
  • The Pro-Lifter is equipped with a smart digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button the lifting function is automatically activated and regulated. The sensor automatically provides for the optimum level of suction, keeping objects in complete control whether the object is being lifted or even during movement
  • When you want to remove the tool from the object you simply push the red vacuum release button
  • The tool operates on 14.8 volts 2600 mAh Li-ion removable battery. The battery takes two hours for a full charge. On a full charge, this powerful battery can last for 900 cycles or 1.5 hours on non-stop running. The battery lasts for a whopping 30 days on standby mode
  • Just like the Classic model, GRABO PRO is also equipped with four lifting lugs placed on both sides of the grab handle. These lugs become handy in case the tool is to be used with additional grips or straps for support

Specifications

  • Model/SKU - GRABO PRO-LIFTER 20 / GP-1Li-FB
  • Battery - 14.8VDC 2600mAh Li-ion
  • Rated Power - 16W
  • Charger Input Voltage - 100-240VAC 50/60Hz
  • Battery Charging Time - ~2hrs
  • Non-Stop Running Time (Full Charge) - 1.5hrs
  • Running Cycles (On Full Charge) - 900 ON-OFF cycles of 10 seconds
  • Stand-by Mode (Charge Hold) - 30 days
  • Pump Service Life - 100000+ ON-OFF cycles / 800+ hrs continuous
  • Rated Air Flow - 0.7cfm (20 L/min)
  • Maximum Vacuum Rate - 11.6Psi (0.8 Bar, 80 kPa)
  • Maximum Lifting Capacity - 375Lbs (170 kg)
  • L x W x H - 11.77 x 7.22 x 4.76 (300 x 184 x 121 mm)
  • Net Weight (With Battery) - 3.2Lbs ( 1.5 kg )
  • Working Temperature - 32°F~140°F ( 0°~60 °C )
  • Applicable Surface Type - Peak/valley heights less than 0.1 (3mm), arc less than 5°
  • Additional Features - Pump stops automatically at maximum vacuum rate ( 11.6Psi / 0.8 Bar )

Kit Includes

  • GRABO Pro tool (2021 model with digital display)
  • Multi-socket charger
  • Seal (preinstalled on the tool)
  • Battery (preinstalled on the tool)
  • Tough Oxford fabric carry bag
  • Operators manual in English

Applications

  • The Nemo GRABO is a fully portable electric vacuum intended to lift, move and place everything from glass, various panels, benchtops and many other applications.
  • Designed for flooring professionals, glass installers, carpenters, movers, construction workers and more

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like