Glasscorp Glass Etching System is an easy to use, portable, fully mobile and no mess system. It utilises the latest in chemical techniques, providing a way to appropriately mark and identify glass to meet legal requirements. It has a low setup cost and no compressor is required. With this system there is no risk of scratching aluminium or other forms of paintwork. The computer generated stencils can be customised to meet customer requirements.
Kit Includes
- ETCH-SP - 60ml SPRAY (Step 1) & Application Card with link to Application Instructions
- ETCH-S - 18 x STENCILS (Step 2) - Each stencil is 38mm x 45mm
- ETCH-G - 45ml GEL (Step 3)
Application Instructions
- Clean glass surface to be etched with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC). Spray surface (or on the shiny side of the Stencil) with the Step 1 Spray (ETCH-SP). DO NOT allow the spray to evaporate before moving to Step 2.
- Place the shiny side of the Stencil (ETCH-S) onto the glass (shiny side DOWN). Force out residual liquid or any bubbles with the card. Let the Stencil dry for 2 minutes to fully adhere.
- Dab the Step 3 Gel (ETCH-G) on top of Stencil. Dab and repeat with 2-3 coats, ensuringing the gel is away from the stencil edge. Leave for 5 minutes.
- Remove the Stencil using the card to lift the corner, enabling it to be removed in one motion. Spray surface with Universal Glass Cleaner or Hi-Sheen Glass Cleaner and wipe with a paper towel or a rag to remove all remaining gel.
Applications
- To appropriately mark glass for identification to meet legal requirements
Notes
- Customers should independently determine the suitability of this product for their specific purpose prior to use