UV ADHESIVE LAMIFIX 678 - 85g
UV100
Please register or log in to place an order.
UV Glues
This UV-curing adhesive is crystal clear and has medium viscosity. It shows good capillary properties with glass up to 6mm thick. Due to its elasticity, this adhesive is ideal for bonding many different material combinations. It also has the capacity to absorb vibrations in the bonding joint. Especially interesting, however, is its suitability for bonding laminated safety glass, where the PVB film absorbs much of the UVA radiation. Because this adhesive is made to also cure by daylight, it reacts with the remaining radiation (above 380 nm) and cures. Butt joints are no problem, even when multilaminated units are involved; the adhesive does not affect the PVB layers. Lamifix adhesive is ideal for bonding laminated glass to laminated or ordinary glass, but also to wood, stone, metal and many thermoplastics. When bonding thermoplastics you should always do intensive testing first because not all thermoplastics can be bonded without problems.
Features
- Laminated glass
- Elastic final consistency (high vibration resistant)
- Low strength
- UV curing
- Crystal clear
- Can be used for some glass to wood, stone, metal and some plastics (always test before use)
- Medium viscosity
- Not water resistant
- Recommended dispensing needle UV106A with UV107 adapter
Applications
- For three-dimensional bonding
- For bonding laminated safety glass
- For bonding less translucent glass (coloured glass)
Notes
- Store in cool, dry and dark location and use before expiry date shown on bottle
- As this is a specialised process please contact Glasscorp to confirm application suitability and for full instructions before proceeding
- Customers should independently determine the suitability of this product for their specific purpose prior to use
