Multipurpose non-shrink Class A cementious grout. Based on Portland cement, graded aggregate and chemical additives, which in part controls expansion.


  • All general purpose grouting
  • Precast and prestressed panels
  • Grouting in column based, base infilling
  • Filling core holes and defects in concrete
  • Some Balustrade applications


  • Gaseous expansion system compensates for shrinkage and settlement whilst in the plastic state
  • Can be poured or pumped
  • Economical, low in-place costs
  • Ready to use, pre-mixed, requires only the addition of water
  • No metallic iron content to cause staining
  • Lower water/cement ratio reduces drying shrinkage, increases durability and reduces permeability
  • Excellent flow characteristic when used in fluid consistency, will fill intricate cavities
  • Complete void filling resulting from gaseous expansion in plastic state

Note: Contact Glasscorp for advice on Balustrade applications

Note: Customers should independently determine the suitability of this product for their specific purpose prior to use

Refer Tables Pg 118 of Catalogue for the Typical Properties after 7 days cure at 25C and 50% RH, strength, and coverage

Safety Datasheet


In order to assist us in reducing spam, please type the characters you see:
spam control image

You may also like