The PLS180NZ is a self-leveling horizontal and vertical cross line laser.

Unlike other cross line lasers available on the market, the PLS180NZ features a full 180° span width to the horizontal & vertical laser lines, the longest in the industry. The vertical laser line goes right behind the laser whilst the horizontal laser line wraps right around behind the laser.

If placed against a wall the vertical line will run up the wall behind the unit, across the ceiling and down the opposite wall to the floor. The horizontal line will run all the way around the room.

Simple to use and operate, the PLS180NZ has 3 modes of operation. Horizontal line, vertical line or cross line (both horizontal and vertical line intersect in front of the laser at the same time).

The PLS180NZ can be simply placed on the floor, kitchen/bathroom surface or mount it to a timber stud or metal frame using the wall bracket. For height control of the horizontal line, mount the PLS180NZ to a height elevating camera tripod.

The PLS180NZ can be used outside between 5 to 30 meters with the optional PLS SLD receiver. (See image direct left)

The PLS180NZ is designed for builders, tiling, glaziers, boat builders, kitchen and bathroom fitout, electrical technicians, structural steel and joiners, and commercial interior fitout contractors.

product features - Automatic self levelling - 2x 180° laser line beams. Horizontal line, vertical line or both (cross line) - Outdoor pulsing mode for use with the optional PLS SLD receiver - NZ calibrated, tested and supported - Pendulum lock not required - Parts & service available - Long battery life of 25 hours

PLS180NZ specifications - Accuracy: /- 3.0mm at 30 metres - Beam Span: 180° - Operating Range: Typically 30 metres (dependant on light conditions) - Self Leveling Range: /- 6° - Weight: 305 grams including battery - Battery Type: 3 x 'AA' Size Alkaline batteries - Battery Operating Time: Up to 25 hours - Warranty: 2 Years (limited warranty)

You may also like