cart  (0) Shopping Cart
   You have 0 items   
SIMSON ISR 70-08 (SMP) 290ML CARTRIDGE
larger imageMove mouse over the image to magnify

SMS1

SMS1

SIMSON ISR 70-08 (SMP) 290ML CARTRIDGE

Simson(r) ISR 70-08AP is a high quality one component, moisture curing automotive windscreen adhesive based on Silyl modified Polymer (SMP). It has been especially developed for bonding windscreens. Simson ISR 70-08AP is tested according to FMVSS212 and has a 45 minute drive away time with twin airbags. Simson ISR 70-08AP also provides a rapid and efficient way to fasten many different materials for OEM, coach works, mobile units etc, especially where immediately or shortly after installation objects have to be moved during or after the manufacturing process.

Features

  • 45 minute drive away with twin airbags
  • High green strength
  • High slump resistance
  • Primer-less application
  • Simple pre-treatment
  • Moisture cure
  • No solvents, isocyanates or PVCs
  • No staining of skin or motor vehicle body
  • Easy residue clean up
  • Low volume shrinkage
  • Low electrical conductivity
  • Excellent UV stability
  • Compatible with most industrial paints
  • Good adhesion to many substrates without the use of a primer
  • Excellent adhesion without primer to UV blocking ceramic coating (Frit band) on windscreens (Ceramic coating should be cleaned first with Glass Wipe Frit Band Cleaner, code - WBGW)

Applications

  • Bonding windscreens/glass without the use of a primer where the windscreen has a ceramic coating (Ceramic coating should be cleaned first with Glass Wipe Frit Band Cleaner, code - WBGW)
  • Bonding windscreen/glass without a ceramic coating in combination with Simson(r) Primer G black out primer, code - SMSG
  • Fastening of many different materials (Please contact Glasscorp Ltd for full details)

Method of Application

  • Simson(r) ISR 70-08AP can be extruded by a hand sealant gun, pneumatic gun or battery sealant gun
  • Application temperature should be between 5C and 35C
  • There are three installation methods for installing replacement windscreens.
  • Long method
  • Short method
  • Reverse method

For full details about these methods please contact Glasscorp Ltd

General Information

  • For good adhesion a clean, dry and grease free surface is required
  • For glass with a ceramic coating the ceramic coating should be cleaned prior to the application of Simson(r) ISR 70-08AP with Glass Wipe Frit Band Cleaner code - WBGW Note: Sufficient time must be allowed for Glass Wipe Frit Band Cleaner (WBGW) to dry before application of Simson ISR 70-08AP
  • For glass without a ceramic coating or where the ceramic coating does not supply sufficient UV protection the glass should be cleaned with Glass Wipe Frit Band Cleaner (WBGW) before application of Simson Primer G (SMSG) black out primer which provides a UV protective coating. Note: Sufficent time must be allowed for the Glass Wipe Frit Band Cleaner (WBGW) to dry before application of Simson Primer G (SMSG) and also for Simson Primer G to dry before application of Simson ISR 70-08AP
  • The windscreen must be bonded onto the body within 15 minutes of application of Simson ISR 70-08AP
  • Cleaning of tools or removing uncured residue of Simson ISR 70-08AP can be done with a clean colourless lint free cloth and Glass Wipe Frit Band Cleaner (WBGW)

Note: The above information covers general points only For full details on products and application please contact Glasscorp Ltd

Note: Some applications may require the use of a specific Simson(r) Primer

Note: Customers should independently determine the suitability of this product for their specific purpose prior to use

You might also be interested in ...